Prusa Mini Probe Holder and Fan Spacer Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My original minda holder wouldn't hold the probe perpendicular to the bed properly and would cause one side of the…
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 164
- Makes
- 2
- Views
- 1,115
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
My original minda holder wouldn't hold the probe perpendicular to the bed properly and would cause one side of the probe to be closer to the bed.
So I modified the holder by adding a 3rd point of contact to keep the holder from shifting and modified the fan spacer so you can put a 3mm nut on the inside to mount the screw.
I would recommend printing these with Prusament PC Blend but if you don't use any fancy filaments you could use PETG or PLA.
Print instructions
I printed these both using Prusament PC Blend @ 100% infill