1 / 2
LACK Table Wrench (55x55x45mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 51mm square wrench that will help you assembling LACK Tables and stop your hands from becoming sore.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 58
- Makes
- 1
- Views
- 300
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
When assembling a large quantity of LACK tables from IKEA, screwing in the feet will become really hard on your hand. Therefore you can use this handy wrech to help you install the feet.
This wrench has an inner diameter of 51x51mm which is suitable for the 55x55x45mm LACK tables. Other variants may have other feet sizes. The hole is equipped with a small radius to avoid mangling the edges of the foot.
Print Settings
Perimeters: 3
Infill: 25% Cubic (less is probably fine)