PI OctoPi Lack Enclosure Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UCTRONICS single PI 3/4 rack mount with SSD rail
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have two of the below 1U rack mounts. I found that as most of what I build I had a part that I could not use due to the way I ran electrical wires. Of the 5 PI mounts with SSDs I put it on the bottom shelf of the Lack Enclosure I built and keep seeing that it was just taking up space on the shelf. I took the measurements and had a couple of m3 by 4 inserts so off to Fusion 360 I went.
I took the measurements off the 1U rail, the distance from threads to threads. Printed v1 in orange and v3 in black which is what I have included here. The orange version I will be able to use and as I have time or requests. I'll create a version with our the full set of sides as it take about 17 hours to print.
I have included the link to the 1U rail below. I have HA, PiHole, and a generic server running in the 19 inch rack. I am now able to get the OctoPi off the shelf and in a safe place that wont go flying or get in the way of spools on the shelf.
Please rate and enjoy. Love to get any feedback on the design.