Head Leveling Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
60mm leveling base to level tripod's video head
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 79
- Makes
- 1
- Views
- 540
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this leveling base to level a tripod's video head to a DIY mini crane. The upper and the base mounting surface are 60mm and you can attach it with standard 1/4-20 or 3/8-16 fitting. The ball allows 10 degrees of movement in any direction. I have tested with about 4 kilos equipment and works perfectly.
Hardware : 2 x M4 x 30 Screws
2 x M4 Nuts
2 x M4 Washers
Printing material : PETG
Nozzle diam. : 0.4
Layer high : 0.2
Top & Bottom Solid Layers : 10
Perimeters : 8
Infill : 30%
Tips
No supports needed except the knobs for the hex pockets with support enforcement (in Prusa or Superslicer).
Optional, I printing the gray parts (the clamps and the spacer) with PETG-CF for more rigidity.