1 / 5
LowRider 3 CNC SKR+Raspberry Pi Control Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remixed control box for the LowRider3 CNC for the SKR 1.x and Raspberry Pi 3
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 91
- Makes
- 0
- Views
- 1,093
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a re-remix of Jeffeb3's remix of the LowRider3 CNC's control box. It enables mounting the SKR 1.3/1.4 controller, a Raspberry Pi 2B/3B/3B+, and LM2596 buck converter. Optionally, I also glued in 2 x Wago mounts to distribute power within the case. All screw holes are designed for M3 BHC.
Changes:
- Lengthened case by 20mm to accommodate additional hardware
- Shifted SKR board back to make room for cable routing on all sides of the PCB
- Added a 30x10mm fan to keep things inside the case cool(er)
- Rotated Raspberry Pi to externally expose ports and re-oriented to be parallel with the bottom of the case.
- Added mounting points for an LM2596 buck converter to power the Pi.
- Relocated V1 logo cutout to the right of the Pi to accommodate power ingress.
Note: The taller blue heatsinks that came with my stepper drivers were a little too tall for the lid to close without touching. I opted to use some lower-profile heatsinks to resolve the clearance issue.