SSD 7mm Mounting Wall Gizmo - ElementSystem Compatible
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SSD (7mm) mounting wall gizmo was designed to be compatible with the tool wall plate produced by Element System.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
SSD (7mm) mounting wall gizmo was designed to be compatible with the tool wall plate produced by Element System.
The tool wall plate:
https://element-system.com/en/tool-storages/storage-sets.html
Gizmo is divided into 2 parts so they can be easily printed.
1) Pillars - 4 pillars between the back-plate and the SSD
2) Back-Plate - mounting gizmo including the wall hooks.
Hooks on the back-plate shall be placed upwards during the printing. They are printed without any support easily.
There is also a similar gizmo for the Raspberry Pi 4 if you need it. https://www.prusaprinters.org/prints/41737-raspberry-pi-4-mounting-wall-gizmo-elementsystem-c
Print instructions
Rafts: No
Supports: No
Resolution: 0.15 mm
Infill: 15%
Filament: Filament PM PLA Pearl Red