SSD 7mm Mounting Wall Gizmo - ElementSystem Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SSD (7mm) mounting wall gizmo was designed to be compatible with the tool wall plate produced by Element System.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SSD (7mm) mounting wall gizmo was designed to be compatible with the tool wall plate produced by Element System.
The tool wall plate:
https://element-system.com/en/tool-storages/storage-sets.html
Gizmo is divided into 2 parts so they can be easily printed.
1) Pillars - 4 pillars between the back-plate and the SSD
2) Back-Plate - mounting gizmo including the wall hooks.
Hooks on the back-plate shall be placed upwards during the printing. They are printed without any support easily.
There is also a similar gizmo for the Raspberry Pi 4 if you need it. https://www.prusaprinters.org/prints/41737-raspberry-pi-4-mounting-wall-gizmo-elementsystem-c
Print instructions
Rafts: No
Supports: No
Resolution: 0.15 mm
Infill: 15%
Filament: Filament PM PLA Pearl Red