MotorcycleTool Tube EndCap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.52 – €5.52 net (excluding VAT)
For file: TransAlp tool tube bottom_0.35mm_PLA_MK3S_3h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.02 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 3.48 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cap for 4 inch tool Tube
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Had an “Oopsie” on the trail and lost my tools so decided to make a ToolTube from 4"PVC pipe for my TransAlp. This is the unremovable base that I secured to the PVC pipe using 3) #10 screws 1inch long. Color changes in the Gcode.
Opted to use an Oatey test plug for the other side like the one found HERE
Edit: After Pricing Oatey test plugs, I opted to print something a little less substantial. Find it HERE