Native-brand Shampoo & Conditioner Pump Limiter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have short hair, so the Native-brand shampoo and conditioner pump puts out WAY too much in one go. This limits it!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
I have short hair, but I enjoy the Native-brand shampoo and conditioner you can get at Target. However, the pump puts out WAY too much in one go. This print limits it with a simple reusable snap-on clip!
This size limits the pump to about ½ pump, which seems right for my shorter men's haircut. If there's interest, I could upload other options e.g. for a ¾ pump—let me know if there’s something that would be useful to you.
I printed mine on Inland PLA+, but it should be pretty versatile. It's tight enough to stay on, but forgiving enough to easily pop off and reuse on a new bottle. My print cost about 2¢ and took around 10 minutes to print—and I figure it will nearly double the lifetime of each shampoo and conditioner bottle it's used on, so it’s worth it!
Print Settings
- 0.2mm layer height
- 0.4mm first-layer height for adhesion
- 10% infill, cubic
- 0.8mm walls; 2× wall line count
- No supports
- No brim or raft