Dual output Hepa/carbon Filter for printer enclosure MARK 2 !
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual output Hepa/carbon Filter for LACK printer enclosure [SOON pictures of the installed thingie !] This is the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Dual output Hepa/carbon Filter for LACK printer enclosure
[SOON pictures of the installed thingie !]
This is the second design : this one should fit into the Lack table, the filterblock simply slide inside.
It's designed to fit a 120mm fan (in the motor block), a hepa filter and a carbon filter (in the drawer). I use an Arctic P12, which fits without screws. any other should do, I guess.
EDIT : Arctic P12 silent (1050 rpm) seems way too weak for hepa+carbon - it needs something which can run a little higher - will be tested soon.
Knob has to be fixed with 2 m3 bolts (30mm) and self-locking nuts, it will slide the slide piece to open or close the filter. It is the only piece that needs supports (for the nut holes)
The filter block has to be printed standing (rotate 90°), without support, if your printer can retract correctly, not like mine ;) ... It slides laterally into the fan case. The drawer comes inside the filter block.
Hepa used : https://www.amazon.de/gp/product/B09M1Z839Q/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1
There are two designs of the motorblock and the knob cache : simple ones, and a second ones with some ziggy stardust design.
Category: 3D Printer Accessories