Ender 2 Pro hotend enclosure, BL-Touch, optimised component cooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My goals for this project were to integrate a BL-Touch sensor, optimise component cooling, and have a great design.
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 241
- Makes
- 9
- Views
- 2,895
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Required accessories:
BL-Touch Sensor
Radial Fan 4020
Screws needed: (You can use some of the original screws)
2pcs M3x20 (Optional M3x16)
2pcs M3x12 (Optional M3x14)
2pcs M3x6 (Optional M3x8)
3pcs M3x10 (Optional M3x12)
2pcs. nut M3 Self-locking
2pcs M2x12
2pcs. nut M2
BL-Touch Sensor Position
X: -20mm
Y: -5,5mm
The firmware has to be reloaded to activate the new components, I use "Marlin 2.1.2".
There is a pre-configuration for the Ender 2 Pro, here you have to activate the BL-Touch or the Filament Runout Sensor if you use one.