1 / 1
Bambu Labs Spool Desiccant Carrier
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep it dry
- Rating
- 4.947 / 5
- Likes
- 329
- Downloads
- 2,998
- Makes
- 40
- Views
- 14,365
- Reviews
- 38
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Strongly recommend this remix/remodel
------------------------------------------------------------------------------
A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.
Pre-configured 3MF for Bambu Studio or use the high resolution STEP file (split it into parts in your slicer of choice). If you have a different spool, the Fusion file can be tweaked to match.
Print with 6 walls, 0 top/bottom layers, and35% honeycomb infill to get that lovely desiccant-holding grid effect; takes just a bit over an hour.