Ikea Ribba Picture Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I struggled to mount the Ikea Ribba so I made an extended hook that mounts to the wall.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
As you know, the Ribba frames have a terrible recessed wall hook, which makes mounting them a nightmare. I wanted some wall hooks that could be screwed to the wall securely so I didn't have a untightend screw in the wall. So I made some hooks that allow you to securely mount the frames.
I made the part with flats and hexs so to keep the part vertical you can use a spanner whilst you tighten the screw. I'd recommend tightening by hand to control the hook orientaion.
As I always do, I've included the step file as I know everyones application is slightly unique and they may need to mod the part to suit their walls, part tolerances etc. I found that the stand on the smaller frames interferred with the hook when in portrait so I just pulled the hardboard stand off and it fit, so just be mindful of the smallest frame.
To mount mine I used.
1 x Picutre hook
1 x Fischer DuoPower 6x30 plug
1x turbodrive 3x60 screw