Portable hand Fishing ring (cuban YOYO) / Carrete de pesca a mano portátil
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Manual reel for fishing by hand, compact and practical / Carrete manual para pesca a mano, compacto, practico y versátil
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 538
- Makes
- 5
- Views
- 3,500
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
ENGLISH:
Manual reel for fishing by hand, compact and very practical design, it has holes to insert your fingers and hold it firmly to wind the line. in the center a fastening hole for fishing with a bow or slingshot, on the edges 3 small holes to hook the hook or for passive fishing, a loop is passed through the hole and tied to a flexible tree branch to cushion the pulls. Inspired by a commercial model that I saw on a friend some time ago in a survival course, it is very light and takes up very little space, making it ideal to always carry with you on outings to the sea or mountains.
Instructions:
Layer height: maximum 0.2, recommended 0.16
Top and bottom layers: 4-5
Walls: minimum 2 but recommended 3
Infill: 35-44% gyroid or similar, but 100% recommended because there is no great difference in time and it improves remarkably.
Design to not require supports
Weight: 40 grams approximately
Material: it is recommended to print in PETG, ASA or ABS because it will be in continuous contact with humidity and the sun. but we have tested with PLA and it complies for a long time
Printing time with Bambu x1: 1 hour
----------------------------------------------------------------------------------------------------------------
ESPAÑOL:
Carrete manual para pesca a mano, diseño compacto y muy practico, tiene agujeros para meter los dedos y sujetarlo firmemente para enrollar el sedal. en el centro un orificio de sujeción para pesca con arco o tirachinas, en los bordes 3 pequeños agujeros para enganchar el anzuelo o para pesca pasiva, se hace pasar un loop por el agujero y se ata a una rama de un árbol flexible para que amortigüe los tirones. Inspirado en un modelo comercial que vi a un compañero hace tiempo en un curso de supervivencia, es muy ligero y ocupa muy poco espacio por lo que es ideal para llevar siempre encima en las salidas al mar o montaña.
Instrucciones:
Altura de capa: máximo 0.2, recomendable 0.16
Capas superior e inferior: 4-5
Paredes: mínimo 2 pero recomendable 3
Relleno: 35-44% giroide o similar, pero recomendable al 100% porque no hay gran diferencia en tiempo y mejora notablemente.
Diseño para no necesitar soportes
Peso: 40 gramos aproximadamente
Material: recomendable imprimir en PETG, ASA o ABS porque va a estar en contacto continuo con la humedad y el sol. pero hemos probado con PLA y cumple durante mucho tiempo
Tiempo de impresión con Bambu x1: 1 hora 18 minutos