1 / 5
Portable hand Fishing ring (cuban YOYO) / Carrete de pesca a mano portátil — zdjęcie 1
1 / 5

Portable hand Fishing ring (cuban YOYO) / Carrete de pesca a mano portátil

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Manual reel for fishing by hand, compact and practical / Carrete manual para pesca a mano, compacto, practico y versátil

Ocena
5 / 5
Polubienia
76
Pobrania
540
Wydruki
5
Wyświetlenia
3523
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

ENGLISH:

 

Manual reel for fishing by hand, compact and very practical design, it has holes to insert your fingers and hold it firmly to wind the line. in the center a fastening hole for fishing with a bow or slingshot, on the edges 3 small holes to hook the hook or for passive fishing, a loop is passed through the hole and tied to a flexible tree branch to cushion the pulls. Inspired by a commercial model that I saw on a friend some time ago in a survival course, it is very light and takes up very little space, making it ideal to always carry with you on outings to the sea or mountains.

Instructions:

Layer height: maximum 0.2, recommended 0.16

Top and bottom layers: 4-5

Walls: minimum 2 but recommended 3

Infill: 35-44% gyroid or similar, but 100% recommended because there is no great difference in time and it improves remarkably.

Design to not require supports

Weight: 40 grams approximately

Material: it is recommended to print in PETG, ASA or ABS because it will be in continuous contact with humidity and the sun. but we have tested with PLA and it complies for a long time

Printing time with Bambu x1: 1 hour

----------------------------------------------------------------------------------------------------------------

ESPAÑOL:

 

Carrete manual para pesca a mano, diseño compacto y muy practico, tiene  agujeros para meter los dedos y sujetarlo firmemente para enrollar el sedal. en el centro un orificio de sujeción para pesca con arco o tirachinas, en los bordes 3 pequeños agujeros para enganchar el anzuelo o para pesca pasiva, se hace pasar un loop por el agujero y se ata a una rama de un árbol flexible para que amortigüe los tirones. Inspirado en un modelo comercial que vi a un compañero hace tiempo en un curso de supervivencia, es muy ligero y ocupa muy poco espacio por lo que es ideal para llevar siempre encima en las salidas al mar o montaña. 

Instrucciones:

Altura de capa: máximo 0.2, recomendable 0.16

Capas superior e inferior: 4-5

Paredes: mínimo 2 pero recomendable 3

Relleno: 35-44% giroide o similar, pero recomendable al 100% porque no hay gran diferencia en tiempo y mejora notablemente.

Diseño para no necesitar soportes

Peso: 40 gramos aproximadamente

Material: recomendable imprimir en PETG, ASA o ABS porque va a estar en contacto continuo con la humedad y el sol. pero hemos probado con PLA y cumple durante mucho tiempo

Tiempo de impresión con Bambu x1: 1 hora 18 minutos

 

Tagi