1 / 3
Bowden Panel Passthrough
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a collection of models to allow a bowden tube to securely pass through a 3mm panel at three different angles.
- Rating
- 5 / 5
- Likes
- 195
- Downloads
- 971
- Makes
- 5
- Views
- 3,690
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
This model is designed to mount on a 3mm panel and comes in three angles relative to the panel 0°, 30°, and 45°.
The mounting pattern is an equilateral triangle with sides of 26mm. You will need to drill three 3mm (or 1/8") holes and one 5mm (or 3/16") center hole. When mounting to an acrylic panel make sure to drill slowly and carefully to avoid cracking, especially when drilling the larger center hole.
For each instance, you will need:
- 3 M3x8 SHCS
- 3 M3x4 Heat Inserts
- 1 PTFE Tube Press Connector
(Pictures show 30° passthrough)