1 / 3
Bambu Magnet Scraper 12x3mm and 15x3mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bambu Magnet Scraper 12x3mm and 15x3mm
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 1
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ASA or PETG Recomended, NOTE Profile is in PLA
NOTE 15x3mm is Untested but I made it because the 12x3 Magnets are harder to find
The 15x3mm is actually 15.2 so it should slide in but if not its a 25min print
This Scraper works great and attaches to the side of the machine using one 12x3mm magnet
Want to buy me a Slice of Pizza? http://buymeacoffee.com/TheTexMech