Mxx60 R2 - 60% Gasket Mount Mechanical Keyboard Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An overall improvement of the Mxx60 with better internals, lower front height/typing angle and more compatibility.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 199
- Makes
- 1
- Views
- 4,246
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Update: Added Wooting 60HE compatible plates
This keyboard is purposefully designed to be 3d printed with a 2-3-2 design so that it is printable on standard size 3d printers and creates a solid assembly with only screws and no glue.
Improvements from r1:
- lower front height (about the same as a tofu)
- lower typing angle
- more layout options with 7u or 6.25u bottom row
- 6 different plate options
- more mounting point options (you can make it more or less stiff)
- enlarged enter stab cutout to work with the DZ60
- more clearance between parts so they fit together better
- more screw points to make it more solid and allow for full isolation gasket mount
- deeper gasket grooves to allow for thicker gaskets
- one piece plates provided incase you would like to get a plate made with a different material such as aluminum.
Plate options:
- Normal: All mounting points, the most stiff typing experience
- Flex: Omits the mounting points on the spacebar to give a more bouncy typing experience and less harsh bottom out
- OG: Mounting points from the r1, the most flexy typing experience. Would not recommend with a hotswap pcb.
Plate Layout options:
- 7u: works with either the WK top or the WKL top (required for WKL)
- Ansi: works only with WK top (not compatible with WKL)
7u plate layout compatibility:

Ansi plate layout compatibility:

Configuration Shown:
- Overture Clear Blue Petg
- 7u Normal Plate
- WKL Top
- Instant60 Tsangan Pcb
- Gateron Cj's
- GMK White on Black
- TX stabs
For this Keyboard you will need:
- A standard 60% pcb:
Compatible pcbs include: DZ60, AN-Cv2, Instant60(Ansi/Tsangan), KeebsRGB 60% PCB, H60 USB, DZ60RGB-ANSI, DZ60RGB-WKL, any other 60% pcb with left side usb.
- 1/16 in thick Neoprene foam (you can choose other foam if you want it to be softer this stuff is pretty hard)
- 20 x m3*8 screws
- 4 x m3*6 screws
- Stabilizers
- Mx compatible Switches
- Mx compatible Keycaps
- Bump-on feet (optional)
- For Wooting plate you will need standoffs
To assemble:
- Cut gasket foam to size of gasket grooves (if you use a plate that omits mounting points you can skip those grooves)
- install gasket foam into grooves (if using neoprene foam linked to use two layers on the bottom case and one layer on the top case)
- connect bottom case parts together with ramp pieces with 4x m3*6 screws for the thinner parts and 4x m3*8 screws for the thicker parts
- install stabs into pcb (would recommend lubing)
- install switches into plate and pcb (7u plate will work for both wk top and wkl top. Ansi plate only works for wk)
- I would recommend putting on keycaps before installing keyboard assembly due to flex
- place keyboard assembly into the bottom case
- place either wk or wkl top case onto the bottom case and plate
- screw in top case to bottom case with 16x m3*8 screws (sorry a lot I know)
- Begin typing ;)