Counting matching models…
Sizes of the models (Width): Size Width (mm) 60% Mini 293 65% - 311 80% Tenkeyless 366 100% Full Size 399 Printing Instructions: Resize: If needed (already common sizes), resize the model to fit your specific keyboard. (Needed width/model…
This is a 60% keyboard case designed for the WT60. I recommend printing it with 30-40% infill for a nice solid feel and to help minimize that hollow sound you sometimes get with plastic cases. Here's what you'll need: - M2x4x3.2 threaded…
Switch film I designed as the design of these lekker switches is different from other gateron/cherry mx ones & those films tend to deform when applying to the lekker switch. These likely also fit the new Gateron KS-20 hall effect switches…
Based on Wooting Two feet. Wooting Two HE seems to have a revised, more hollow design without the rubber tips, but the sizes seem to be the same, so it should work as a replacement for Wooting Two HE series as well. The part is available…
jakeu's Wooting 60HE Optimum Wrist Rest Wooting didn't make a matching wrist rest for the Optimum collab, so I decided to make my own! Printing Instructions High bed temp, brim or even glue is highly recommended to make sure the top…
You only need to print either the two big ones (recommended) or the 4 small ones. Tested Setup: Material: PLA Infill: 5% Layer Thickness: 0.2mm Printer: Prusa i3 Mk3S+
Its a model to clip on the Keyboard and use for holding Phone or Tablet on it. You need thicker Rubber Feets to use
Print standing up right (assuming your printer is tall enough) for a smooth finish. V2 is 1mm shorter so that you can add rubber grips on the bottom
This is a wrist rest model for the Wooting 60 HE. The model accomodates the 45 deg tilt of the keyboard in the front. The model is split in the middle to fit the printspace of the mk3s. In order to print the whole model, please copy and…
Tolerances are rather tight to make sure it doesn't fly out when cranking 90s in Fortnite. Made by Jakeu jakeu.gg
Wristrest for the Wooting 60HE with the possibility to wrap in leather or other.
This was the first thing I designed and printed on my 3D printer. This device holds the keypad at a 30 degree angle for a more neutral hand position and better ergonomics. I can't find the video now, but someone was showing a setup where…
Wrist rest attachment. Print: -layer height 0.2 -for other side just mirror the part -callibrated printeris recomended because there is only little tolerance Use double sided tape 1mm thick and w/h 6x12mm Lay printed parts on flat…
To improve the rigidity of this model (i.e. not rely on a single small strip of glue), I added a T-Slot to the underside of the model. The variances are pretty big and should thus be suitable for all printers - they can then be used to…
Printed in PLA at 0.2mm layer height and 3 perimeters. Don't think the infill matters much. This is sized around the non-LED model, although I'm pretty sure the LED model has the same dimensions. step file is included for modifications if…
USB holder that attaches to the back of a Wooting 80 HE Keyboard The model that gave me an idea for my model was made to hold your phone to the back of the keyboard… I took their idea and changed it to hold USB drives(9) I uploaded the…
Just a little thing to keep your wooting wrist rest from sliding away from a tofu redux case
Made in freeCAD. I printed with 0.2 Layer Height and 5% infill, 0.4 nozzle.
