60% Keyboard case (Wooting compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
60% case for WT60. Should be compatible with other 60% pcb's (havent confirmed myself though).
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 200
- Makes
- 0
- Views
- 1,385
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
This is a 60% keyboard case designed for the WT60.
I recommend printing it with 30-40% infill for a nice solid feel and to help minimize that hollow sound you sometimes get with plastic cases.
Here's what you'll need:
- M2x4x3.2 threaded inserts (for mounting the PCB)
- alternatively you can screw directly into the standoffs (not recommended as this is less reliable)
- Rubber feet (to keep it from sliding around)
If you have a larger printer like a P1, X1, or A1 (non-mini), I've included a print profile for printing the whole case in one piece diagonally on the bed.
For smaller printers, I've also included split files. The split design has a 0.5mm gap between the two halves, so it should be easy to glue together.
Hope you enjoy your new case! I'd love to hear what you think – feel free to leave any comments or questions below. And if you make one, please share a picture – I'd love to see your build!
Edit: v1.1 versions have bigger holes for the heatset inserts to go into. Use the normal files if you want to screw right into the case.