60% Keyboard case (Wooting compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
60% case for WT60. Should be compatible with other 60% pcb's (havent confirmed myself though).
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 60% keyboard case designed for the WT60.
I recommend printing it with 30-40% infill for a nice solid feel and to help minimize that hollow sound you sometimes get with plastic cases.
Here's what you'll need:
- M2x4x3.2 threaded inserts (for mounting the PCB)
- alternatively you can screw directly into the standoffs (not recommended as this is less reliable)
- Rubber feet (to keep it from sliding around)
If you have a larger printer like a P1, X1, or A1 (non-mini), I've included a print profile for printing the whole case in one piece diagonally on the bed.
For smaller printers, I've also included split files. The split design has a 0.5mm gap between the two halves, so it should be easy to glue together.
Hope you enjoy your new case! I'd love to hear what you think – feel free to leave any comments or questions below. And if you make one, please share a picture – I'd love to see your build!
Edit: v1.1 versions have bigger holes for the heatset inserts to go into. Use the normal files if you want to screw right into the case.