BenQ GL/RL Series Monitor Under Desk Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows a BenQ monitor with a monitor stand like in the photos to be mounted securely under a desk for quick sowing .
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
The monitor I use for my test area is a BenQ RL2455 (as far as I can tell lol). Half the time my projects do not require a monitor, and as such I used to set it on the floor to free up desk space, but this isn't Ideal as sometimes I tripped over it.
I designed this handy, sturdy clip which allows me to stow the monitor away when I don’t need it, and keep it off the floor. You will need to print 2 of these for a sturdy mount.
These clips should also work with any BenQ monitor with an identical stand. Let us know in the “makes” what monitor you have and if they worked for you!
I recommend printing in PETG for a little flex as the monitor does click into place, although PLA+ could work as well. Not sure if I would trust it to regular PLA.
note: the slit in the clip is intentional and creates more “top” and “bottom” layers in the middle of the clip, to add strength. I’d recommend using 4 top layers, 4 bottom layers and 4 parameters (or more?) and then maybe 10-15% cubic infill.
pro tip: to assist in “clicking” the monitor into place, placing some painters tape over the rubber feet on the monitor stand will reduce the drag when you go to press the monitor into the clips. (See photos)
Don’t forget to post your makes and get your free prusameters! Also leave a like if you found this helpful!