Counting matching models…
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
This is a remix of "The HIVE" from Thingiverse. I printed out "The HIVE" but the connection was too loose for me. For this reason, I created a new model with 0,2mm tolerance and add different sizes and inserts. Print instructions 0,3 mm…
Print approx. €9.95–€12.16 excl. taxPreliminary estimate for one variant
This is a curled up version of the fabulous Friendly Articulated Slug designed by Isaiah Steckling ( Printables , Thingiverse ). It is intended to print large and really huge slugs. For normal size slugs you can use the original model.…
Print approx. €35.04–€42.83 excl. taxPreliminary estimate for one variant
It's a two-metre version of my low-poly world map, and the biggest printing project I've done so far. It took me a couple of months and about 5kg of filament to print (including some failed prints). It is quite easy to print. Just print…
Print approx. €5.03–€6.15 excl. taxPreliminary estimate for one variant
I designed this Elder Wand from pictures after watching the Harry Potter movie series again in anticipation of Halloween. It is divided into two pieces so that it will print on smaller print beds, but have also included the full wand for…
Print approx. €4.89–€5.97 excl. taxPreliminary estimate for one variant
What is this [ Update 3: Added variants without interlocks after a specific user request.] [ Update 2: Added a larger triple hex cup after a user suggested it. Check the file section.] [ Update 1: Added two variants with greater wall…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Those brave souls who risk madness and worse to keep the web (mostly) organized and stylized. They deserve all of our thanks, but also perhaps just a bit of good-natured ribbing. Print this model and give the CSS guru in your life the…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
What is this [ Update3: A couple of more variants were added after recent user requests. 1) Now there are models with a 1x3 and a 2x3 footprint including larger lids. They should work the same way as the other variants and should be fully…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
It's a one-metre version of my low-poly world map ( bigger version (the real images show the two-metre version)) It is quite easy to print. Just print each individual files. Use the last picture, which shows how the parts come together,…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Osteranhänger für den Osterstrauß weitere Modelle: Osterei mit Schneeglöckchen Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Christmas tree…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
There are already a number of hand-powered helicopters entered in the Make It Fly contest (like this , and this , and this , and this and this ), so why add another? Well, I was intrigued by these new toroidal rotors (all the cool kids…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
I wanted to create a bookend for my movie collection and thought that this pose was interesting and different from the standard pushing/leaning bookend design. The model is right side bookend, but it can simply be flipped in the slicer…
Print approx. €15.85–€19.38 excl. taxPreliminary estimate for one variant
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
If you want a ridiculously over-designed (over-artisted?) solution for holding your phone, this i the model for you! :) My goal was for it to not really look like a phone stand when it wasn't in use. I also didn't want the model's face to…
Print approx. €13.98–€17.08 excl. taxPreliminary estimate for one variant
This set includes knurled screw heads designed to fit hex bolts according to ISO 4017 . The bolt length can be freely chosen, giving you maximum flexibility for your projects. The design also accommodates matching washers according to ISO…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…
Print approx. €17.03–€20.82 excl. taxPreliminary estimate for PETGSource material: PET
I started playing around again in Shapr3D on my MacBook and managed to come up with another interesting fidget toy design almost by accident. This one uses two interlocking spiral parts that twist together in a few different ways. The…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
Butterfly bodies in which a folded banknote can be put as fanned wings. The butterflies can be stuck into a flower with a wooden skewer (shish kebab or similar). The wooden skewer used in this case is about 3mm thick. Suitable for all…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
🧢🧣Gravity Holder – Cleverly Held by Gravity!⚪ The Gravity Holder uses a freely moving ball that securely clamps objects in place using nothing but pure physics and gravity! Simply slide a towel, cap, or scarf between the holder and the…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
The Brandenburg Gate is one of the landmarks of Berlin and one of the most important symbols of Germany. It stood like no other for the division of two states and became a symbol of unity. Its history, however, dates back to the reign of…
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for one variant
There are already some knurled knobs for hexagon nuts, but no design is parametric and offers you sizes from M2 to M56! The model uses the dimensions according to DIN 934 (see the attached data sheet). A tolerance of 0.5 mm is set for the…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Knurled thumb knobs for ISO M4, M6 and M8 Hex nuts or bolts. Diam = 18mm, Thickness = 10mm. Printed with PLA, 0.4 nozzle, 0.2 layers and 40% infill. Also included : 3MF containing my preferred custom G-Code and all settings. Updated :…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Does not require support material Print with back face (power cord plugin area) on the print bed
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Hexagon styled seedling planters 3 heights to combine for visual esthetics or different plant needs. Easy to fill when connected due to reduced spill over. Careful release by gently pushing up the bottom inlay. 13 pieces fit one standard…
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for PETGSource material: PET
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
I just loved this model. Remix of Lizzard to add smile and some texture on back. Sliced files added for PLA with 1, 2 or 3 Lizzards. Very cute original design by McGuyBeer and remix of Curled Articulated Lizzard by Stetofire.
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
This is a two piece self-watering planter. 100mm diameter. Prints in two pieces which fit together. Inner piece holds the plant and soil. Outer piece holds the water. Test for water-proofness before putting on something which could be…
Print approx. €9.27–€11.33 excl. taxPreliminary estimate for PETGSource material: PET
Older people often have trouble opening plastic bottles. Also, people with gout or other disabilities lack the strength to turn the small caps independently. The reason is the small diameter of the caps, which requires a strong grip with…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple cup for storing spices like garlic or other small items. It is not air tight, so it is only useful for short-term storage of spices or to store items that don't need special conditions. Note: if printed in orange it also…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
Miniature girl for your diorama, architectural miniature or as a figurine. Woman | Girl | Student | Tourist | Architectural figurines | People | Model Girl with long hair wearing jacket, pants with pockets, hiking boots and backpack. She…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
New Orleans Saints The bottom black part is printed separate from gold and glued in (STL). G.code has it as one piece.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Harley-Davidson Poker Chip connectable frame. Great for those collectors! chips are magnetic with thin metal in the middle There are pegs and holes on each side of the pieces to hold them together. These pieces connects together into a…
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant
This is a gCode file that you can use in your Laser Engraver to test the effect of speed vs power. It will produce a Greyscale burn pattern that is 140 mm / 107 mm. You can use this test pattern to get an idea of how your engraver will…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 6 Magnete 6mm x 1mm (3 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant
Bob Marley: 3 Little Birds Statue
Print approx. €16.34–€19.98 excl. taxPreliminary estimate for one variant
Miniature girl for your diorama, architectural miniature or as a figurine. Woman | Girl | Student | Tourist | Architectural figurines | People | Model Girl with long hair wearing jacket, pants, hiking boots and backpack. She is suitable…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Airless or Beanless Hacky-Sack. --TPU - Med-Hard. Version 2: hack.obj hack.3mf. I will keep the old hackeysack.3mf up. If Someone would not mind printing in in tpu and giving the old version a try and test run with TPU that would be…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Logo du film JURASSIC WORD, imprimable en deux couleur pour un meilleur rendu.
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
I recently picked myself up an OmniVap XL and have been loving it, but I wasn't able to find any containers that I really liked for it. Inspired by some other knurled containers I saw on Thingiverse, I decided to try to design my own. I…
Print approx. €3.62–€4.43 excl. taxPreliminary estimate for PETGSource material: PET
Air assist connector. Designed for direct connection of quick coupling and flex hose 1/4" thread with minimal stress on the printed model. I recommend inserting O ring 11/2 Printed without support. PETG / layer 0.1 !!! / perimeters 5x…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Wandhalterung für Verlängerungskabel oder Schlauch. Kurze und Lange Version. Wird ohne Support stehend gedruckt. Befestigungslöcher haben 6mm.
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for PETGSource material: PET
Introducing a single-piece Terraforming Mars Player Mat overlay, printable in one piece on a Prusa Mini! Given that the Terraforming Mars Player Mat is larger than the printable area on the Prusa Mini, most existing player mats are either…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
I had so much trouble printing the original trophy plaque, so I decided to design a simpler and more solid one, which is printable without MMU und supports. You can find the original trophy from OversizedHat here .
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Holds four irons: a curling iron, a flat iron, and two wands. No supports needed. Print the Curling_Iron_Holder upside down as shown in the photo (not as displayed in the model). I designed the Four_Cord_Holder from scratch, but the…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Nakładka na hak o kuli średnicy 50 mm. Nakładka jest blokowana zapięciem z gwintem dokręcanym kluczem w zestawie. Gdyby wygięcie haka było zbyt ostre, należy skrócić klucz, by móc dokręcić zacisk. Hook cover with a ball diameter of 50 mm.…
Print approx. €19.87–€24.28 excl. taxPreliminary estimate for PETGSource material: PET
Young Girl With Roses in Her Hat Le Jardin de Rodin, Paris, Ile-de-France, Frankreich
Print approx. €11.84–€14.47 excl. taxPreliminary estimate for one variant
This is a new take on my Counterswirl Top . The original top had 2 arms twisting clockwise and 10 arms twisting counterclockwise. This has 3 and 12, which increases the mass and lessens the impact of small irregularities or alignment…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Island Surf Girl
Print approx. €14.61–€17.85 excl. taxPreliminary estimate for one variant
This bottle connector allows you to join two plastic bottles together, creating an exciting vortex effect. Fill one bottle with water, attach the connector, and invert the bottles so the water-filled bottle is on top. Shake it, and watch…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Curled rat, second half 19th C CE, by Suzuki Masanao, now in the collection of the Minneapolis Institute of Art. improved version of an older model I fixed up.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
Aerator key, equivalent to Neoperl 16mm. On Prusa Mk4 IS, I used .10 variable layer height, brim on, in orientation of the STL. Designed in OpenSCAD.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
The Idea: Make long garlands with your printer! p.s. this only works with PLA , as it has the property of softening below 100°C (212°F). The garlands are neatly nested on the print bed, allowing you to create a total length that extends…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
The model has the pass trough hole which can be used to illuminate the eye using the LED from the pump. The eye could be printed in different material/painted to really shine (as example used original model picture). I was concidering…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Mister Torgue Flexington : Borderlands
Print approx. €4.56–€5.58 excl. taxPreliminary estimate for one variant
A somewhat official looking 3d printable hanger for American Girl dolls. it would look great multicolor using an mms or ams. I made this at my mother's request
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
A twist-style fidget toy inspired by the shape of a garlic bulb. The segmented design allows the model to expand and twist into a dynamic spiral form, creating a satisfying transformation between a compact decorative object and an…
Print approx. €8.74–€10.68 excl. taxPreliminary estimate for one variant
This is a small collection of player aiding overlays etc. for the board game Merchants & Marauders. First and foremost is the overlay for the ship hit locations, which I found was very difficult to keep in place on the player board. I…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Diese Maskenverlängerung erleichert das Tragen von Gesichtsmasken (Covid-19). Sie schont die Ohren und ist angenehm zu tragen. Eine Seite der Maske wird in die Verlängerung geklickt damit beim Abnehmen der Maske die Verlängerung an der…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 8 Magnete 6mm x 1mm (2 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
Scraper for everything, designed to be easily printed on a 3D printer, you can basically use it to remove morning frost from your windshield and thousands other use!!! Happy Printing!!!
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
Need a way to pay at the Our Generation Cafe? Use this terminal from Square! This Square credit card terminal is for American Girl / Our Generation dolls because it's at 1:3 scale but you can modify the scale. This terminal has a hole to…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
Ruhig den Einzug mal ausstellen und die Temperatur ein paar grad höher. Der Filter wird dann durch das Stringing sehr fein.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
I was tired because my Ryobi Cordless Router could not hang just like my other Ryobi tools. Then I found the Ryobi RLYARD Lanyard, which was only a half solution. Then there is only one solution, print a new top for RLYARD. It works with…
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for one variant
Jurassic World lamp (lampshade).
Print approx. €24.94–€30.48 excl. taxPreliminary estimate for one variant
[IMPROVED VERSION] - https://www.printables.com/model/691264-knurled-knob-improved Simple knob upgrade. It fits the Mk3 line of machines, but I am unsure about Mk4 and MINI. Use a textured sheet for a better look on the bottom surface.…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Highly detailed 3D model of a World War II warship . The design captures realistic proportions, deck details, towers, and weaponry. Perfect as a collectible piece, decorative model, or as part of tabletop games. Disclaimer: This model is…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
for all miners out there für alle Bergbauarbeiter da draußen
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Meine Frau ist überglücklich damit und hat 3x die Markisenbreite als Wäscheleine. Jeder kann sich natürlich seine Breite und Dicke des Halters nach seinen Wünschen erstellen, aber ich habe nun mal die 7mm Kederleiste und dort passt er…
Print approx. €8.40–€10.26 excl. taxPreliminary estimate for one variant
Wanted to make a little gift for a friend of mine that is excellent at BBQ :) So made this little Warning sign, He was very happy for it. It was made as a multicolor design with each color seperated into layers for easy assignment in the…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
Remix of https://www.thingiverse.com/thing:857803 by @abuharsky. Added two holes for zip ties (as you want to have the light on the way home) and with smaller interlock for common LED lights with bottom stop. – Very handy solution when…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 16 Magnete 6mm x 1mm (8 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Spirálu je nutné tisknout naležato s podpěrami. (Stačí PLA, 15% kubická výplň). Spojovací úchyt tisknout stranou s koulí dolu. Pokud vás tlačí čas jako mě, můžete úchyt říznout v 90 mm, budete pak mít díru jen na jeden vrut, to úplně…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
Took the existing LM10UU adapter into Blender and extended the open area by 26mm.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Print approx. €3.78–€4.62 excl. taxPreliminary estimate for one variant
Hello world, Here you have a map of Switzerland / outlines of Switzerland. The X & Y diemensions are set to fit right on the Mk3S+ :) but you can adjust the Z-height as you like. The uploaded G-Code is sliced with a Z-height of 10mm . If…
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
The lamp was inspired by generative design. The original generative design calculation was simplified and reinforced in the VR environment and optimized for 3D printing (no support necessary). The powder-coated tubes have a diameter of…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
I needed a quick plug to close off drybox PC4-M10 fitting holes. Couldn't find one that printed flat on the build plate.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Original part has a “latch” on a long, thin (1mm thick) leg. Thin leg bends when pressed by the door and then latches when the door are completely closed. After some time this leg broke and I couldn't close shelf's door. For that reason I…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Bookend for you Sherlock Holmes book collection.
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Keder end piece for Bürstner Club 1992 This is a recreation of a end cap of a rear Kedar rail on Bürstner Club caravan build 1992. The model is made for the right side, if you need one for the left one, mirror it. You could use an UV…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
I was looking for a commercial made vinyl siding bracket to mount an Arlo wired video doorbell but could not find one. So I made one. I’m including a step file for anyone that wants to mod this, should make it easier. I used 4 perimeters…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of two models made by two different makers; combining what I feel are the best parts of both of their designs. If, because of under-extrusion, it is a little loose than desired, shim it, tape it, or add a bit of superglue…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Ce vase est inspiré du travail sur la texture que je vais appeler surface perle. D’ailleurs je vais regrouper les modèles perle dans une gallerie. Sa surface, que je décrirait comme perlée, joue profondément avec la lumière et attire le…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
Remix of: https://www.thingiverse.com/thing:4615791 Serverless Framework Brass Knuckles. Follow me for more Serverless stuff on Twitter: https://twitter.com/FilipPyrek Print Settings Printer Brand: Prusa Printer: Mini Rafts: No Supports:…
Print approx. €8.64–€10.56 excl. taxPreliminary estimate for one variant
This is one of a total of four fresh keeping boxes for leftover vegetables: Garlic You can find the other three (Tomato, Lemon, Onion) here . Printing information Layer height: 0.20mm Infill: Support Cubic 20% Support: none If necessary,…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: UNITED KINGDOM, UKRAINE, CZECH REPUBLIC,…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Replacement cleaning tool for an older model of Zyliss garlic press, Susi 2. I removed the stringing in the matrix of small pegs using an ESD brush with very stiff bristles.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Materialunterlage für Kappsäge oder Kappzugsäge. PETG Düse 0,4mm Schichthöhe :0,15mm Die Schichthöhe von 0,15mm oder weniger ist empfehlenswert. Die höhenverstellbare Materialunterlage ist mit einem Feingewinde versehen. Beim Absägen von…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for PETGSource material: PET
This is the stand alone CTRLDock Classic enclosure to use with the Heber CTRLDock classic gaming and retro controller DE9 and DA15 - for example Amiga/Atari and NeoGeo style control joysticks and pads.
Print approx. €6.62–€8.10 excl. taxPreliminary estimate for one variant
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext “MEINE PERLE” (= my pearl) More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
A small articulated desk buddy inspired by a garlic bulb. The model features movable legs connected with print-in-place joints, allowing simple posing and interaction. The arms are fixed, while the segmented garlic shape gives it a…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Zwei kleine Dekolichter die Ihr aus transparenten PLA drucken könnt. Einfach Zusammenbauen und ein elektrisches Teelicht (oder sowas in der Art) reinstellen. Zum zusammenbauen braucht ihr: Kleber, pro Licht 4x Magnet Durchmesser 5mm x 1mm…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Držák na berle k handbiku COMP modelovaný v Onshape volně stažitelný k úpravám. Chrutch 22mm, tube 22mm. 3x Screews M4 lenght 40mm. Velcro 20mm lenght aprox. 200mm.
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for PETGSource material: PET
This was almost impossible for me to figure out how to do and streatched my abilities to the limits. It will likely torture your printer and it shouldnt be attempted unless you have it dialed in enough to minimize stringing. I've set up…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
![Warning sign - You are about to eat the worlds best BBQ [Multicolor Manual color swap Or MMU2s]](https://media.printables.com/media/prints/165742/images/1540085_8bdb8fad-d388-4ed3-b5c3-9bff6514d46a/sign.png)
