1 / 1
Cheapest Filament Dryer Box ever
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dryer box that uses your heated bed as a heat source to dry filament
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 0
- Views
- 804
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I started having moisture problems with my filament so I decided to try my hand at creating a solution to drying my own filament. I did have a 70mm 12V pc fan, as well a spare 12 volt power supply. I used 3mm screws and embedded threaded insert, but screws with nuts would work as well.
Should hold a 1kg roll no problem, and can be remixed to use a larger fan if needed.
Place this over a roll of filament on your bed, pre-heat bed to 90-100, and turn the fan on to keep air circulating. Works like a charm!
Printed at .28 layer height
PLA+