Ventilation 75mm Swivel Joint
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 2-axis swivel can be used for 75mm ventilation tubes.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 1
- Views
- 400
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
75mm ventilation tube 2-axis swivel joint able to rotate in up to 3 points. Will sleeve 75mm ventilation tube in both ends.
You will additional need:
- 2 x M3 nut
- 2 x M3 x 24 bolt.
- Superglue.
Model 1, 5 and 6 are to be printed twice.
Preferred material is PLA or ABS/ASA. PETG is not suited because it is difficult to glue.
At least 3 walls and 4 top/bottom layers with at least 30% cubic infill for strength is recommended.
You will need to glue the following parts together:
- Part 6 to part 5 and part 5 to part 2A or 2B. I used part 2A (the short one).
- Part 6 to part 5 and part 5 to part 4.
M3x24 bolt and M3 nut are to used in model 1.
See pictures for how to fit together.
See additional parts in my ventilation collection.