1 / 1
Taiko force lv.5 - Bachi Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Store your Bachi like a pro!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 711
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to store my bachi with the taiko. If I left them separate I'm sure I would lose them sooner then later. But not anymore!
Disclaimer: I am not responsible for anything going wrong with either your drum, bachi or parts thereof.
You may also be interested in control box brackets: https://www.printables.com/model/630766-taiko-force-lv5-control-box-brackets-with-simple-s
23mm diameter bachi is the maximum this will hold! (That is the wood with grip tape applied)
How to install:
- Print holder (Any reasonable settings will do. Larger layers will speed up the print time significantly).
- Put bachi into the holder and put it on one of the legs. When satisfied with the position remove bachi and mark the holes with pencil.
- Remove leg from taiko.
- You have two options (Use M4 flat face bolts):
- Drill 3mm hole, then tap 4mm threads (or drill 3.5mm hole and use the bolt itself to tap). Then screw the holder into the leg.
- Drill 4-4.5mm hole, then use nuts and washers from the other side
- Reassemble taiko
- Enjoy