Prusament box tea organizer inlay
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.36 – €4.11 net (excluding VAT)
For file: Prusamentea 6 low no base_0.2mm_PLA_MK3S_4h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.73 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 4.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prusament boxes happen to be a good size to keep tea in. Here is an inlay for sorting the tea bags.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 61
- Makes
- 2
- Views
- 1,113
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Prusament boxes happen to be a good size to store tea in. Here is an inlay to sort the tea bags. There are variants with 3, 6 and 9 compartments, with and without base, high and low walls. These are each designed to be printed in spiral/vase mode with 0.4 or 0.6 nozzles at 0.2 layer height. The bases are 0.6mm high - you should adjust the base layers accordingly. The bulge in one wall fits into the hole in the box and helps with alignment. If you are printing without a base, you should consider a brim and make sure your print adheres to the bed properly.
Additionally, there is a "full" version that is meant for conventional printing.
…and of course, you can use it to store other stuff as well.