Ikea SKÅDIS filament spool holder, Voron style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to hold filament quickly above my printer so I modified Voron spool holder to fit into Ikea SKÅDIS pegboard.
- Rating
- 4.769 / 5
- Likes
- 68
- Downloads
- 478
- Makes
- 15
- Views
- 1,581
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Voron Design standard spool holder modified to fit into Ikea SKÅDIS pegboard.
No need for bearings or anything else except standard PTFE (Teflon) Bowden filament tube to minimize the friction so spool can rotate easily.
Should be simple to print, but requires some small support to hold the hooks.
Recommended printing material is ABS, but others can be used as well.
Note: I had to sand with a file just a bit to get hooks into the holes and it is tight so it does not move, which I like.
Let me know how it works for you, thank you.
Updates:
- Some esthetical modifications edits in v2, upper part covering panel hole when attached.
- Added model for large spool size, up to 110mm width.
It works fine with Formfutura Titan-X ABS 2.3kg spool, check the pictures.
TODO:
Larger holder with reinforcement, possibly to hold more secure large spool or x2 normal spools at once.
