Logitech G25 Clamp Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These extensions for the Logitech G25 steering wheel move the clamping point about 25mm back.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 99
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This leg extension for the G25 wheel moves the clamping point back about 25mm so that the wheel can clamp on desks with a bevel. The stock mounting point is roughly 35mm from the edge of the desk. My Uplift desk has a 44mm bevel, so the wheel slides right off. By moving the clamping point 25mm further from the edge it produces better leverage for a more solid mount.
Print with 2 outer shells and 15% infill, no supports. When you install them note that they do not come back off easily! I had to remove the first test set by breaking them open with pliers. To install, simply slide over the original clamping surface and push until they snap into place - or pursuade them with a solid tap.