Prusa Bear 2.1 - Z Top Right for Reverse Bowden
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified Grégoire Saunier's version of z_tops.stl to add the ability for a M6 threaded quick connect fitting for a…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 514
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I modified Grégoire Saunier's version of z_tops.stl to add the ability for a M6 threaded quick connect fitting for a reverse bowden setup.
This works really well with cimoalpacino's spool holder:
https://www.prusaprinters.org/prints/34288-prusa-bear-2020-spool-holder-quick-change
Stock Prusa Bear files are available here: https://github.com/gregsaun/prusa_i3_bear_upgrade
Print instructions
Print with the same settings as default for the z_tops.stl version which are:
0.2mm layer height
20% infill (Gyroid)
4 perimeters
5 top and bottom layers.
Source:
https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/dev/doc/print_settings.md