Dancing Clef 45 record adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.32 – €0.39 net (excluding VAT)
For file: GCODE_45_Record_Adapter_all_0.2mm_PLA_MK3S_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 25.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is an adapter for your 45 rpm records, which makes even the clef dance.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the dancing clef record adapter.
To make one you have to print 1 adapter and 8 clef attachments.
Assembly is simple: just put all 8 cleft into the 8 half-moon shaped openings of the adapter.
Make them dance:
To achieve the dancing effect you need a camera.
A 45 rpm record rotates 0.75 times per second, therefore 6 clefs move by in one second.
This means ideally you should film with 6 fps.
However, the smallest amount of frames on my phone is 30 per second.
So I filmed with 30 fps and deleted 4 frames in between. (keep frame 1, delete 2-5, keep frame 6, delete 7-10,… and so on)
I used a GIF creator app for it, but I'm sure most video editors will do the trick.
Also I uploaded the .step for you, so you can play around with it and create your own dancing objects.
Have fun with it!