Drill Chuck Record Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.07 – €2.53 net (excluding VAT)
For file: Drill Chuck 45 Record Adapter_0.2mm_PLA_MINI_2h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.30 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.62 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 45 RPM record adapter that came right off the front of a power tool.
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 180
- Makes
- 0
- Views
- 1,326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
What better combination is there than music and power tools?
This 45 rpm record adapter designed around a drill chuck requires no supports to print, and allows for an optional color change before and after the knurled section. Will accommodate a drill bit around 4 mm in diameter if you want to complete the look.
In addition to the STL, I've also attached the 3MF and ‘gcode’ files that show the settings I used in the Prusa Slicer to print the one shown in the picture. Enjoy!
----------
Minor update (2023-03-15): I noticed when "playing" with this with my kids that the jaws could be a bit weak if forced, and so I just updated the STL/3MF/GCODE files to include a hidden reinforcement piece on each jaw that should make them better able to handle getting tossed around.