Chicago Flag

Printable Chicago flag! Printed with Prusamenet: Pristine White, Azure Blue, Lipstick Red. Stars require a very small drop of glue in the center of the base for them not to fall out. Blue inserts sit snug, but you can also put a drop of glue at the end where the border is on the base to make sure no one slides it out. Make sure you check the overlap on the blue insert so that it goes over the border on the base when inserted. This print is best assembled after a shot of Malört.

Edit: I've added a tighter star tolerance version of the base. This works perfect on my printer and removes the need for glue but might be too tight on other printers. I'd recommend doing a test print with the test_tighter_star and see if a star fits. I've also added a large version.

This print should work when scaled in your slicer but I haven't tested it (I would only scale on the X/Y axis, but if you want to make it deeper update Z on all models equally).  You can also update the flag_width parameter in the fusion file to generate proper meshes for any size (the height updates based on width)