Simple Prusa Mini Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple spool holder for Prusa Mini+ (and similar).
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 283
- Makes
- 4
- Views
- 2,215
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple spool holder for Prusa Mini+ (and similar).
They sent me a wound plastic that protruded beyond the coil and I could not use the standard coil stand. Those models of holders that I found seemed to me too complicated (and requiring additional details) and I decided to simplify one of the projects as much as possible. It is now a single part and prints faster.
I successfully tested with a 920 gram coil, with a large weight, the strength may become unstable.
You will need two T-nuts 2020 and two M3 screws so as not to disassemble the base, you can print for example these https://www.printables.com/model/96135-prusa-mini-t-nut
I printed with 40% infill and 0.25 layer. Print time 2.5 hours. No support required.
_______________
(It seems I have to use the same license as the author of the original model, so I repeat it)