1 / 7
CR-6 SE/Max 6burner version 4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6burner V4 bowden mode only. Enhanced hotend (40x40 fan) and part cooling (5015 blower).
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 143
- Makes
- 1
- Views
- 1,597
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 6burner V4 can be used either in bowden mode only with different hotend installed (stock, microswiss, mellow, primacreator, …) and other like dragon.
The part cooling is improved by installation of a 5015 radial blower fan. The air channel is bigger and terminated by a part cooling duct with different tested options. The user can also design his own part cooling duct.
The hotend fan can be either
- the stock (30x30) attached to the hotend
- a 40x40x10 fan attached to the hotend
- a 40x40x10 attached to the cover for more versatility with different hotends
NEW !
- Cover with new aesthetic and hotend fan attached
- Shorter cover (better view on nozzle) with new aesthetic and hotend fan
In use and tested :
- All part cooling ducts
Part_duct_2sides_v4 tests see pictures (yellow PLA-NX2 from Extrudr)
Part_duct_square3_V4 tests see picture (green PLA-NX2) - Bowden stock mount
- 5015 blower fan mount
- 40x40x10 hotend FAN
- LED support