Cr-10 Smart Display Side Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I upload 2 files First: is the one you find on the picutes. That the version i use. Second one: i close the side as it…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 1
- Views
- 458
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I upload 2 files
First: is the one you find on the picutes. That the version i use.
Second one: i close the side as it was not needed to be a hole there.
But its up to you what you will use or maybe you will change it in the way you need.
I recomment to print it in upside down by 15 degrees with normal supports.
Flip it in the front that all 3 screw holder get a small support. was working at me pretty well.
With Standard quality it works pretty well.(you can find a pic)
Dont be afraid to push it strong inside. it fit perfect.
Print info:
71g
10 Hours 52 min
Standard Quality 0,2mm
Have fun by printing.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
30%
Filament:
Amazon Basic PLACategory: 3D Printer Parts