Gridfinity Skadis T-Nut Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts for the Gridfinity System, that use T-Nuts to mount to Skadis pegboard
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 367
- Makes
- 2
- Views
- 2,674
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
There are a couple of Gridfinity/Skadis mounting options out there but I wanted one that reduced wasted space. This one uses the Skadis T-Nut system: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb with M2.5 screws to keep wasted space to a minimum. The mount is flush against the board and only the space needed for the T-Nut system is consumed below the mount.
You'll probably want to print this vertically (with the nut mounting points aligned up). See info on the Skadis T-Nut to see how to attach it. You'll need M2.5 nuts and screws and of course the printed T-Nut gizmos.
I've included 1x2, 1x3, and 1x4 variants of the mount and may add 2xX variants later if have a need for them.
Onshape link here: https://cad.onshape.com/documents/07bd016342e5f864ada9b670/w/bf840f520f9cbc735f1da83e/e/cffd81b79eff691fd5aabfcf?renderMode=0&uiState=6413bbd5fdbd7c18958ea0b8