OpenLog Artemis Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A protective case for the OpenLog Artemis
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 106
- Makes
- 1
- Views
- 511
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This is a protective case for the OpenLog Artemis from Sparkfun. Save your IMU/data logger from being damaged while still allowing access to all the IO. The USB-C port, power/battery input, IO headers, MicroSD card slot, Qwiic connector and the reset button are all accessible while the unit is in the case. There are also 4x 3mm mounting holes so you can mount the unit to something easily.
There are two versions of the lower section of the case. One has holes for M3 heat set inserts (as shown in pictures), the other threads into the plastic.
You will need 2x M3 cap screws between 4mm and 8mm in length for assembly.
Fusion360 design file is included so you can modify it to your liking.
I printed with PETG at 0.2mm layer height with a 0.6mm nozzle and it came out fantastic. Should work fine with PLA or ABS (or any other rigid material).