MagSafe bike mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bike phone mount that is compatible with MagSafe Iphone magnets (harvested mine from an old wallet).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 974
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution
I had an old magsafe wallet and decided to not let the magnets go to waste. I made this mount for my indoor trainer bike that I use in the winter. This should be compatible with most bikes out there as long as the stem is longer than 50mm or so. Holds to the bike with 3 zip ties
Assembly:
- Press the magnets into the top half of the print (no glue required, they are a press fit)
- glue the two halves together. I made sure to avoid getting glue on the magnets incase I wanted to use them again.
I printed this in PLA as it will just be indoors. If you plan to have this outside, I would choose PETG. The phone seems to hold well (I dropped the bike a couple times and it did not pop off), but I am not sure I would trust it on the road.