MagSafe bike mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bike phone mount that is compatible with MagSafe Iphone magnets (harvested mine from an old wallet).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 974
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
I had an old magsafe wallet and decided to not let the magnets go to waste. I made this mount for my indoor trainer bike that I use in the winter. This should be compatible with most bikes out there as long as the stem is longer than 50mm or so. Holds to the bike with 3 zip ties
Assembly:
- Press the magnets into the top half of the print (no glue required, they are a press fit)
- glue the two halves together. I made sure to avoid getting glue on the magnets incase I wanted to use them again.
I printed this in PLA as it will just be indoors. If you plan to have this outside, I would choose PETG. The phone seems to hold well (I dropped the bike a couple times and it did not pop off), but I am not sure I would trust it on the road.