kWeld Case with vents and knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavily modified kWeld case
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 75
- Makes
- 0
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The original kWeld case was hard to print and I wanted some tighter tolerances. I also added a knob and vents.
It uses the standoffs that come with the kWeld and 4x M3 20mm screws(the screws at the back can be longer) to mount the pcb. The case screws together with heat inserts the dimensions are: M3 Diameter 5mm x Length 3.8mm. Four rubber feet are also recommended so it doesn’t slide around.
The bottom part doesn’t require supports the holes are self-supporting. The top does require supports. I recommend using the organic supports in PrusaSlicer. The knob needs to be printed upside down.
This is the electrode holder I use: https://www.thingiverse.com/thing:4117601
I used PETG, a .6 nozzle and .2 layer height.