1 / 1
EVA 3 Beacon Probe Default / HF Ducts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EVA 3 Ducts with a mount for Beacon Probe. Same as the "default" ducts on the EVA page.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 505
- Makes
- 2
- Views
- 3,206
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need to order the unassembled or LP version, and desolder the USB connector from the amp board if you don't order unassembled. You will also need to solder the wires from the USB cable directly to the amp board.
This uses 3.8mm heat-set inserts to mount Beacon
US source: https://www.mcmaster.com/94180A331/
You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint!
:)