Dishwasher spare wheel
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.73 – €0.89 net (excluding VAT)
For file: DishwasherWheel_0.15mm_PETG_MK3S_59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 58.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spare roller runner wheel 00611475 for lower basket in dishwasher.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 146
- Makes
- 1
- Views
- 594
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spare roller runner wheel 00611475 for lower basket in dishwasher. Genue wheel used in Siemense, Bosch and Neff washmachines.
Dimensions
Model diameter 35mm, height 13.5mm.
Print settings
Model is printable without supports. I recommend to use 0.15 mm layer height since model is small. I used PETG on few wheels and they worked fine but a would advice to use PC since the durability and heat resistenc is much higher. Do not use PLA.
Version
V1
- Shortened wheel pivot
- Holder fits bended wire better
- Reinforced clips on wheel and wire
My work
Do not hesitate to write me any with any question.
Also check out my other models.