1 / 2
Ikea Akerbar Greenhouse Window Ledge Supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports for the Ikea Akerbar Greenhouse to allow them to sit on a window ledge
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 48
- Makes
- 0
- Views
- 2,235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
We wanted to keep our Ikea Akerbar sitting on the window ledge, but the greenhouse was too deep to sit there safely. I designed these to be installed on our window trim to support to avoid any accidents.
I designed this with easy screwdriver access in mind. No supports required. Print with the hypotenuse side on the build plate.
Could also be utilized for supporting shelving etc.
Dimensions: D 3" H 2.25"
MY PRINT SETTINGS:
| Printer | Print Time | Layer Height | Nozzle | Material | Filament | Infill |
| Bambu Lab P1P | 36m45s | 0.24mm | 0.4 | PLA | 16.37g | 15% |
Note: I used 4 wall loops for the added strength.