EVA 3 Fan Duct for 8mm silicone hose (remote CPAP part cooling fan)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CPAP part cooling fan, but CPAP hoses are heavy and stiff. So use an 8mm silicone hose instead.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 104
- Makes
- 0
- Views
- 1,608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Add paint on supports to the inside of the outlet area and the bottom curve.
Use 2 cable ties to secure the 8mm silicone hose to the support bracket so that the air enters the part at the correct angle. With this small (8mm) ID the air is quite directional so if the hose is at an angle right at the entrance to the duct then the air will primarly come out of one of the cooling duct outlets at the nozzle.
There is an air splitter that goes all the way up to the entrance too, so maybe thats enough to protect against this effect…