Trophy Golden Hotend | 3D Printing Award
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printing related trophy!
- Rating
- 4 / 5
- Likes
- 139
- Downloads
- 179
- Makes
- 1
- Views
- 1,314
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
A trophy in the look of a hotend!
I used the design of the E3D V6 hotend as it is probably the most common hotend and used this model from JuanCallon as a template and modified it significantly for this purpose.
All you need is some glue to connect the parts.
The badge can be customized with your own text using PrusaSlicer 2.6 (currently in alpha and downloadable here).
The text is then printed using a color change, also the base can be printed with a color change as you can see on the photos.
The trophy is about 170mm in height.
No special print settings are required. I recommend 2 perimeters, 15% infill at 0.2mm layer height. For a little nicer finish, the hotend can be printed with a lower layer height.
Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :)