UM2 Cross Slider Block for 8mm linear rods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This slide block was design to be use with 8mm rods.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 53
- Makes
- 0
- Views
- 607
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This slide block was design to be use with 8mm rods.
Material that you will need:
2x M2.5 screw + nuts ( 12mm )
2x M3 screw + nuts ( 10mm )
1x M3 screw + nut ( 12mm ) - This one i did use to lock the linear rod.
Original bearing ( ID8mm OD11mm x 30mm )
I did design this parts to be printed without supports.
I do not have an ultimaker so i did not test the parts, if you print this parts pls let me know if they work as is intended.
Print instructions
Category: 3D Printer Parts Summary
This slide block was design to be use with 8mm rods.
Material that you will need:
2x M2.5 screw + nuts ( 12mm )
2x M3 screw + nuts ( 10mm )
1x M3 screw + nut ( 12mm ) - This one i did use to lock the linear rod.
Original bearing ( ID8mm OD11mm x 30mm )
I did design this parts to be printed without supports.
I do not have an ultimaker so i did not test the parts, if you print this parts pls let me know if they work as is intended.