1 / 2
IKEA Sandshult Bracket - Kitchen Roll Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A kitchen roll holder, that can be easily mounted on the IKEA Sandshult shelf bracket, for a 22mm diameter wooden pole
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 474
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Two sides of a kitchen roll holder, that can be easily mounted on the IKEA Sandshult shelf bracket, to hold a 22mm diameter wooden pole about 55cm in length. Printed in two pieces each side to avoid overhangs, which can then be superglued together.
To print:
- Print all 4 pieces
- Infill 25%
- 0.4mm / 0.6mm nozzle recommended (but any would work)
- PLA
- 0.3mm layer height
To assemble and use:
- Rests on the inside of the IKEA Sandshult shelf
- Can hold kitchen roll up to a diameter of 16cm
- Will need a wooden pole about 55cm in length, with a diameter of 22mm
- To take one side on and off, the two pieces can be lifted and slightly rotated forward
Printed in GEEETECH White PLA.