1 / 2
IKEA Sandshult Bracket - Kitchen Roll Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A kitchen roll holder, that can be easily mounted on the IKEA Sandshult shelf bracket, for a 22mm diameter wooden pole
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Two sides of a kitchen roll holder, that can be easily mounted on the IKEA Sandshult shelf bracket, to hold a 22mm diameter wooden pole about 55cm in length. Printed in two pieces each side to avoid overhangs, which can then be superglued together.
To print:
- Print all 4 pieces
- Infill 25%
- 0.4mm / 0.6mm nozzle recommended (but any would work)
- PLA
- 0.3mm layer height
To assemble and use:
- Rests on the inside of the IKEA Sandshult shelf
- Can hold kitchen roll up to a diameter of 16cm
- Will need a wooden pole about 55cm in length, with a diameter of 22mm
- To take one side on and off, the two pieces can be lifted and slightly rotated forward
Printed in GEEETECH White PLA.