V2.4 Skirt Fan Breakout Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for small fan breakout PCB which fits in the hex grid of the side fan supports on the Voron V2.4
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Kind of a hack but I wanted to reduce my electronics cooling fan noise and keep it modular. Here is a mount for attaching an improvised breakout board using a cut down 20mm x 80mm PCB prototype board to the side fan support.
The mount uses two of the mounting holes on the PCB and one drilled out through-hole to attach with M2 screws threaded into the plastic. I trimmed the PCB into a bow-tie to hide it better from outside view. The mount had a good friction fit into the hex holes but I glued it in for good measure. If I ditch this mod I can always print a new side fan support.
I used a buck step-down converter with appropriate current capacity because that's what I had but it could easily just be potentiometer or some resistors if you don't want variability.